Panasonic RX-DT770 - Manual (Page 15)

Listening to Radio Broadcasts
Preset tuning
Make sure you have completed the procedure for “Programming
Broadcast Stations". (See page 14 beforehand).
To listen to a station without programming it first, refer to “Listening
to broadcast stations which have not been programmed”. (See right.)
Using the main unit
TUNER/BAND
Press TUNER/BAND to dis­
play “FWl” or “AM”.
p* AM FM—I
(The display changes each time the but­
ton is pressed.)
\ \
3 c
OC3>r M
81.S
1
___ j
V PRESET TUNING
p^ss V PRESET TUNING A
to select the preset channel.
The station is changed each time the
button is pressed.
cic3.f" w
BU. I
eg)
I PROGRAM I
Using the remote control
Listening to broadcast stations which have
not been programmed (Manual tuning)
1
TUNER/BAND
Press TUNER/BAND to dis­
play “FM” or “AM”.
p AM -*• FM—I
(The display changes each time the but­
ton is pressed.)
i / :3 c A/f
8 /.b
j
- TUNING +
- TUNING
Press - TUNING -i- to tune in
the broadcast station,
+: Press this to increase the broadcast
frequency.
Press this to decrease the broadcast
frequency.
FM stations can be selected automati­
cally (see below).
¡DC A4
8 8 .
'S
f
(
j mu
[ ( C ) “
93 EDSIB''
J
Lights iMien a station ^
s tuned In properly
Lights when an FM stereo
program is picked up.
Selecting FM stations automaticaily:
Keep the button depressed until the frequency display starts to
change. A station with good reception is automatically selected and
the selection process then stops.
15