Automatic link function, Cd eject press ± cd eject on the, Front panel and replace the cd – Panasonic RX-DT770 User Manual
Page 19: Press ►/!! and start recording, Press continue to record the next disc
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Automatic link function
When CDs are loaded In the three trays beforehand, If there is enough empty space on the tape after recording for the first disc Is
finished, recording can be continued with the next disc.
When recording is finished for the first disc
To continue recording a different CD
r
r
Tf
■
\ -ij /
i- Xi
rcsfmrm
Disc to be recorded next
Disc which can be replaced
c?
I
(J)
Recording stops temporarily, the tray
rotates, and then recording of the sec
ond CD starts automatically.
If there is no disc on the second tray,
recording will proceed to the third tray.
CD EJECT
Press
±
CD EJECT on the
front panel and replace the
CD.
When recording is finished for all of the
trays, recording stops temporarily.
Perform the procedures on
page 18 “Synchro Recording”.
Press ►/!! and start re
cording.
When recording is finished for this CD,
the tape stops.
COrvmNUE
Press CONTINUE to record
the next disc.
19