Remote control, O infrared emitter, 0 input selector buttons – Yamaha HTR-5830 User Manual
Page 10: 0 sound field program/numeric buttons, O level, 0 cursor buttons /\/v'/</> / select, Test, 0 standby, System power, Sleep
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
CONTROLS AND FUNCTIONS
Remote control
This section describes the controls and functions of the
remote control when it is set in AMP mode. Please make
sure to select AMP mode before beginning operation.
See “REMOTE CONTROL EEATURES’^on page 47 to
operate other components with this remote control.
O Infrared emitter
Outputs infrared control signals. Aim this emitter at the
component you w'ant to operate.
0
Input selector buttons
Select the input source and change the control area,
0
Sound field program/Numeric buttons
Use to select sound field programs or input numbers.
O LEVEL
Selects the effect speaker channel to adjust.
0 Cursor buttons / \ / v ' / < / > / SELECT
Use to select and adjust sound field program parameters
or SET MENU items.
© TEST
Outputs the test tone to adjust the speaker levels.
0
STANDBY
Sets this unit in standby mode.
© SYSTEM POWER
Tunis on the powder of the unit,
© SLEEP
Sets the sleep tinier.
® 6CH INPUT
Selects the audio source connected to the 6CH INPUT
jacks,
0 CODE SET
Use to set up remote control codes (see page 48).
© AMP
Switches control from a previously selected component
by using the input selector buttons to this unit.
© VOLUME +/-
Increases or decreases the volume level.