Editing sound field parameters, Changing parameter settings, Note – Yamaha HTR-5830 User Manual
Page 55: 1 press amp, 3 press /\ / to select the parameters, Press < / > to change the parameter value
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
EDITING SOUND FIELD PARAMETERS
Changing parameter settings
I lie iiiiliiil soiiinl llelil |'i<iL;i;im seiliiigs will |irovi(le yiiu
with an excellent listening experience as they are. But you
can create an original listening environment by altering
--onie settings.
Note
• The editable parameters vary depending on the sound field
program you select. Refer to the explanation for the parameter.
0 Repeat steps 2 through 4 if you wish to alter
other parameters.
Note
• You cannot change parameter values when “OPTION 2 MEM,
GUARD” is set to “ON”. If you want to change the parameter
values, set “OPTION 2 MEM. GUARD" to “OFF” (see page
45),
=1 =j □ eZH
.■0;a-.-.GS3.
1
Press AMP.
2
Select the sound field program you want to
adjust.
o
MUSIC
©
m/DTS
©
©
TVTHTI
©
MIGHT
©
HOCK EUrtFlBlilMEIjr
MUSIC TVTKTR MOVIE1 MOVIES
m/DTS MIGHT 8.1/5.t
©
i^OVIEI
©
©
©
3
Press /\ / to select the
parameters.
Press < / > to change the
parameter value.
If you press and hold </> to change the parameter value, the
front panel display automatically stops at the factory preset
parameter momently.
51