Recording, Notes, 4 start recording on the recording component – Yamaha HTR-5830 User Manual
Page 43
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
RECORDING
Recording adjustments and other operations are
performed on other recording components. Refer to the
operation instructions for these components for details on
their operation .
ibi b) ni-bi ■
2
—
:0. C3
r. ^ n
L~; r.'.’ r::i Ó
EZ: I : [ZD o
Qj L.J
Notes
• Jo a test recording before you start an actual recording.
• When this tmit is set in the standby mode, you cannot record
between other components connected to this unit.
• The setting of TONE CONTROL, VOLUME, ‘SP LEVEL"
(page 23 ) and programs does not affect the recorded material.
• A source connected to the 6CH INPUT jacks of this unit
cannot be recorded.
• A given input source is not output on the same REC OUT
channel. (For example, the signal input from VCR
1
IN is not
output on VCR I OUT.)
• Check the copyright laws in your country to record from
records, CDs, radio, efc. Recording of copyrighted material
may infringe copyright laws.
If you playback a video source that uses scrambled or
encoded signals to prevent it from being dubbed, the
picture itself may be disturbed due to those signals.
1
Turn on the power of this unit and all
connected components.
2
Select the source component you want to
record from.
<q INPUT P»
CD MD/CD-R TUWER
O O O
or
OMO D-TV/CBL VCR V-AUX
Ó o
Front panel
Remote control
3
start playback (or select a broadcast station)
on the source component.
4
Start recording on the recording component.
39