Yamaha RX-V663 - Manual (Page 103)

Customizing this unit (MANUAL SETUP)
Zone 2 settings F>Z0NE2 SET
F>Z0NE2 SET
^
m X
UOL. ■•■ + 16.5dB
INIT. UOL..... OFF
CA]/[T]: IJp/Down
C-^]/C^3: Adjust
Zone 2 Maximum volume NPX UOL.
Use this feature to set the maximum volume level in the
Zone 2.
Control range: -30.0 dB to +15.0 dB, +16.5 dB
Control step: 5.0 dB
Notes
• The “MAX VOL.” setting takes priority over the “INI.VOL.”
setting. For example, when “INI. VOL.” is set to -20.0 dB and
then “MAX VOL.” is set to -30.0 dB, the volume level is
automatically set to -30.0 dB when you turn on the power of
this unit next time.
• The “MAX VOL.” setting does not affect the output level at the
“ZONE 2 OUT” jacks.
Zone 2 Initial volume INI. UOL.
Use this feature to set the volume level of Zone 2 when the
power of this unit is turned on.
Choices: OFF, MUTE, -80.0 dB to +16.5 dB
Control step: 0.5 dB
Notes
• The “MAX VOL.” setting takes priority over the “INI.VOL.”
setting.
• When you select “FRONT B”, “PRNS”, “Zone B”, or “NONE”
in “EXTRA SP ASSIGN” (see page 85), “Zone 2 SP Not
Assigned” appears in the OSD and the “ZONE2 SET”
parameter is not available.
• The “INI.VOL.” setting does not affect the output level at the
“ZONE 2 OUT” jacks.
99 En