Yamaha RX-V663 - Manual (Page 88)

Customizing this unit (MANUAL SETUP)
Using SET MENU
Use the remote control to access and adjust each
parameter.
• You can change the “SET MENU” parameters while this unit is
reproducing sound.
• If you press ® PARAMETER during the “SET MENU”
operation, the “SET MENU” operation is canceled.
• Press (DRETURN to return to the previous menu level.
1 Press ©AMP and then @MENU to enter
“SET MENU”.
The top “SET MENU” display appears in the OSD.
2 Press ©
A / V
to select “MANUAL SETUP”.
SET MENU
■flUTO SETUP
^ ■MflNUflL SETUP
■SIGNAL INFO
[A]/[T]: iJp/Down
CENTER]: Enter
Press ©
A / V
repeatedly and then press
©ENTER to select and enter the desired
menu.
The following displays are examples where “SOUND
MENU” is selected.
3 SOUND MENU
fl)EQUflLIZER
B>LFE LEUEL
ODVNflNIC RANGE
D:'LIPSVNC
E)EXTD SUR.
[A]/[T]: IJp/Down
CENTER]: Enter
Press ©
A / V
repeatedly and then press
©ENTER to select and enter the desired
submenu.
The following display is an example where “LEE
LEVEL” is selected.
B)LFE LEUEL
^ SPEAKER......0dB
HEADPHONE---ZOdB
3 Press (DENTER to enter “MANUAL SETUP”
The “MANUAL SETUP” display appears in the
OSD.
MANUAL SETUP
1 BASIC MENU
2 UOLUME MENU
3 SOUND MENU
4 INPUT MENU
5 OPTION MENU
C-*-]/CT] ; IJp/Down
CENTER]: Enter
CA]/CT]: Up/Down
C-^]/C^]: Adjust
6 Press
(DA
/
V
to select the desired parameter
and then (Do / o to change the parameter
settings.
• Press (DC> to increase the value.
• Press (D<3 to decrease the value.
7 Press i^MENU to exit from “SET MENU”.
84 En