Yamaha RX-V663 - Manual (Page 41)

Selecting the SCENE templates
This unit is equipped with 18 preset SCENE templates for
various situations of using this unit. As the initial factory
setting, the following SCENE templates are assigned to
each SCENE button (see page 8):
SCENE 1:
DVD Viewing
SCENE 2:
Disc Listening
SCENE 3:
TV Viewing
SCENE 4:
Radio Listening
If you want to use other SCENE templates, you can select
the desired SCENE templates from the SCENE template
library and assign the templates to the selected SCENE
buttons on the front panel and the remote control.
Select the desired SCENE
template
SCENE template library
(Image)
Assign the
SCENE
tempiate to the
SCENE button
Selecting the iesirei SCENE
template to the SCENE huttons
Press and hold the (DSCENE (or ©SCENE)
button for 3 seconds.
The indicator on the selected SCENE button on the
front panel starts to flash, and the name of the
currently assigned SCENE template appears in the
front panel display.
3 seconds
or
Front panel Remote control
Rotate the ©INPUT selector (or press
©AMP and then press ©o / >) to select the
desired template.
DUD Nou i e U i eui
3
Press the ©SCENE (or ©SCENE) button
again to confirm the selection.
The selected SCENE template is assigned to the
SCENE button.
or
Front panel
Note
Remote control
Once the desired SCENE templates are assigned to the
corresponding SCENE buttons, you need to set the input
source of the SCENE template on the remote control. See
page 41 for details.
Flashes
DUD Uieuing
37
En