Advanced setup, Using the advanced setup, Speaker impedance sp imp – Yamaha RX-V663 User Manual
Page 110: P irif.i-isfimini, System off, Tone control, Main zone on/off, Program
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advanced setup
This unit has additional menus that are displayed in the front panel display. The advanced setup menu offers additional
operations to adjust and customize the way this unit operates. Change the initial settings (indicated in bold under each
parameter) to reflect the needs of your listening environment.
N0tB$
• The settings you make are reflected next time you press ®
MAIN ZONE ON/OFF
to turn on this unit (see page 29).
• Only ®
MAIN ZONE ON/OFF, ©SYSTEM OFF, ©TONE CONTROL
and the
©PROGRAM
selector are effective while you
are using the advanced setup menu.
• No other operations can be made while you are using the advanced setup menu.
• The advanced setup menu is only available in the front panel display.
Using the advanced setup
I Press
©SYSTEM OFF
on the front panel to
set this unit to the standby mode.
I
Press and hold
©TONE CONTROL
and
then press
©MAIN ZONE ON/OFF
to turn
on this unit.
This unit turns on, and the advanced setup menu
appears in the front panel display.
TONE CONTROL
While holding
down
;p iriF.i-iSfiMINi
■ Speaker impedance
SP IMP.
Use this feature to set the speaker impedance of this unit
so that it matches that of your speakers.
Choices: 8f2
MiN,
6QMIN
•
Select “8QMIN” to set the speaker impedance to 8 £i.
•
Select “6f2MIN” to set the speaker impedance to 6 Q.
SNPIMP.
SflMIN
3
Rotate the
©PROGRAM
selector to select
the parameter you want to adjust.
The name of the selected parameter appears in the
front panel display.
Currently selected Currently selected
parameter parameter setting
4
Press
©TONE CONTROL
repeatedly to
change the selected parameter setting.
5
Press
©SYSTEM OFF
to save the new
setting and set this unit to the standby mode.
The settings you made are reflected next time you turn on
this unit.
6QMIN
tenp6dsiicNi
Front
If you use one set (A or B),
the impedance of each
speaker must be 8 Q or
higher.
If you use two sets (A and
B), the impedance of each
speaker must be 16 Q or
higher.*
Center
Surround
The impedance of each
speaker must be 8 Q or
higher.
Surround back
Front
If you use one set (A or B),
the impedance of each
speaker must be 4 Q or
higher.
If you use two sets (A and
B), the impedance of each
speaker must be 8 Q or
higher.
Center
Surround
The impedance of each
speaker must be 6 Q or
higher.
Surround back
The Canada model cannot use two separate speaker systems
(A and B) simultaneously when “SP IMP.” is set to “8QMIN”
106 En