Connections, How to connect the rgb input terminals, 0(d(d0 – Panasonic TC-34P250X User Manual
Page 12
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Connections
How to connect the RGB Input Terminals
COMPUTER
▼
L/MONO R
O O ©!-©-©-(?
8 Main QSub. 5-VIDEO VIDEQ AUpiO
AV3
IN
RGB (31.SkHz)
Conversion adapter (if necessary)
D-SUB 15P
PC cable
Notes:
• This unit can be connected to PCs with 640 X 480 (31.5 kHz / 60 Hz) or 640 X 400 (31.5 kHz / 70 Hz) pixel.
• In some cases other PCs may not work with this TV set.
■ There is no audio signal in RGB input.
• The sound of the RGB mode is combined with the Audio signal of AV3.
• Some PC models cannot be connected to the TV set.
• A commercially sold adapter is required to use the RGB cable (D-sub 15P) to connect a
PC-98 series computer (which has a D-sub 15P terminal) or a Macintosh computer to the TV set.
• There is no need to use an adapter for computers with DOSA/ compatible D-sub 15P terminal.
Signal Names for D-sub 15P Connectcxr
®0(D(D0
Pin Layout for RGB Input
Terminal
Pin No.
Signal Name
Pin No.
Signal Name
Pin No.
Signal Name
©
R
©
GND(Ground)
GND(Ground)
G
GND(Ground)
©
NC
B
GND(Ground)
®
HD/SYNC
GND(Ground)
NC(not connected)
@
VD
GND(Ground)
GND(Ground)
®
NC(not connected)
12