Advanced remote control operation, Stereo reception, Cd — v – Panasonic TC-34P250X User Manual
Page 31: Cd v
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advanced Remote Control Operation
stereo Reception
When you receive the stereo/bilingual sound system,
sound output modes can be selected by pressing the
stereo^ilingual sound selection button.
Audio Signal
Mode Indicator
STEREO
CD
MAINI
I
SUBE
E
MONO
V
Type of broadcast
Mode Indicator
1
z
Regular broadcast
(Standard Audio)
No Indicator
V
Regular
+
NICAM MONO I
(MAIN I
)
I —
V
NICAM STEREO
CD — V
NICAM DUAL MONO
(MAIN I
/
SUB E)
I — E
1----- ______ 1
c
CD
O
O
3
Regular broadcast
(Standard Audio)
No Indicator ►
V
BILINGUAL or DUAL
MONO: MAINI/
SUBE
I ^ E
STEREO
CD V
Notes:
•The “A2 (German)” stereoft^ilingual TV sound transmission system is used in the foilowing region; Australia, Malaysia,
Thailand, Indonesia, etc.
The “NICAM" stereo TV sound transmission system is used in the following region; New Zealand, Singapore, China.
• If the stereo signal is poor or the receiving conditions are not optimum or if STEREO:MONO automatic switching
occurs, it is recommended you switch from STEREO to MONO.
• Even when the contents of the receiving signal undergo changes, selection mode is kept intact.
• When the receiving conditions derehomte, listening will be easier if the mode is set to the “MONO" position, using the
stereo/bilingual sound selection button.
• “DUAL", also known as “DUAL MONO" or as “BILINGUAL" is not currently transmitted in some countries.
31