Channel Vision DVR-8N - Manual (Page 48)

-
47
MENU SETUP
or
ª buttons.
the RECORD SETUP and the following screen
Move the cursor to choose the desired time using the
© , ª , § , ¨ buttons.
Select the desired program among PROGRAM 0~9 and POWER OFF using the (-), (+) buttons
Turn right the shuttle ring to set up the schedule of programmed time and the program number
will be green. Turn the left the shuttle ring to release the schedule mode.
Or move the cursor to the desired position and then click the green square next to “SCHEDULE”
us
Press the
UP menu or press the ENTER button to enter
the RECORD PROGRAM menu.
t the RECORD menu,
Move the cursor to the RECORD PROGRAM using
© or ª buttons.
6.3.1 RECORD SETUP
At the RECORD menu,
Move the cursor to the RECORD SETUP using
©
Press the ENTER button when the cursor is on
appears.
or wheel scroll of mouse.
ing the Mouse.
ESC button to exit this RECORD SET
6.3.2 RECORD PROGRAM
A