Channel Vision DVR-8N - Manual (Page 85)

-
NETWORK VIEWER INSTALLATION
9.3
his menu allows you to detect all the units on the local network.
1 Click “Search DVR” button to display the “Search” menu window.
2 Click the “Search” bu he twork will be detected and listed
3 unit “Ad dd the unit into the “DVR list”.
.4 HDD SEARCH
onnect DVR’s HDD with local PC, and then please double-click the Dvrviewer icon and the main
ar on the PC screen.
Click the “HDD search” button and the view screen of HDD detected will appear on the PC
Click the desired one of he “SEARCH” buttons and SEARCH window will appear on the PC
Click the Play button after select of the desired Channel and Search Time in Time Search window.
Click the Search button after select of the desired Channel, Event type and Search Time in Event
Search window and then click the Play button after select of the desired list.
If you want to see the next list, click the Next button before playing.
Click the Search button after input of the desired Search Time in Block Search window and then
click the Play button after select of the desired list.
If you want to see the next list, click the Next button before playing.
DVR SEARCH
T
Search DVR
tton, and then all t units on the local ne
on the screen.
Click the desired
, and then click the d to list” button to a
9
C
menu controller will appe
HDD search
1
screen.
2 t
screen.
3
4
5
NOTE
- You can directly install the removable HDD rack from DVR to PC if compatible rack guide is installed on
the PC. In this case, please check the jumper setting for proper operation.
- You can also simply use external IEEE1394 HDD reader.
84