Channel Vision DVR-8N - Manual (Page 50)

-
MENU SETUP
< Result table of total frame rate >
Event Record
Record Type Image Size Normal Record
Event Channel Other Channel
Unit
Single 360 x 240 Normal Frame ES_Frame RS_Frame CIF/1 SEC
720 x 240 Normal Frame ES_Frame RS_Frame CIF/1 SEC
720 x 480 Normal Frame ES_Frame RS_Frame CIF/1 SEC
Complex 360 x 240 Normal Frame EC_Frame EC_Frame CIF/1 SEC
720 x 240 Normal Frame EC_Frame EC_Frame CIF/1 SEC
720 x 480 Normal Frame EC_Frame EC_Frame CIF/1 SEC
- ES_Frame : Event single frame rate.
- EC_Frame : Event complex frame rate.
- RS_Frame : Remain single frame rate = ( Max. Frame Rate – ES_Frame) /
15.
Select the desired RECORDING INTERVAL using the (-), (+) buttons or wheel scroll of mouse.
RECORDING INTERVAL means at what-second intervals you want to record.
If you set “RECORDING INTERVAL” to “1SEC”, each channel will be recorded by setting frame
rate per “1SEC”.
Set the IMAGE SIZE of each channel using the (-), (+) buttons or wheel scroll of mouse. There
are the 3 types of 720x480(D
1
), 720x240(Half-D
1
) and 360x240(CIF).
* The default is 720x240.
wheel scroll of mouse.
There are 3
Set the PRE
event is dete cted period.
¨ buttons if yo
eans
that the event
You can set the frame rate of each channel using the (-), (+) buttons or
- N : Frame rate for normal recording
E : Frame rate for event recording -
Set the IMAGE QUALITY for normal recording and for event recording of each channel using the
(-), (+) buttons or wheel scroll of mouse.
types, Fine(F)/ Superfine(S)/ Low(L).
TIME and POST TIME using the (-), (+) buttons or wheel scroll of mouse. When the
cted, the DVR will store pre- and post-recorded data during the sele
Choose the type of the EVENT using the (-), (+) buttons or wheel scroll of mouse and © , ª , § ,
u want the event recording(Motion detection/ Video loss/ Alarm) or not. “O” m
T value o seconds.
T
N
he
he f “PRE TIME” is from 0 to5 seconds and the value of “POST TIME” is from 0 to 60
default of pre-recording time is 5 seconds and post-recording is 10 seconds.
ote: The pre- and post- recording is not valid in normal recording mode.
recording is “ON” and “-“ means that the event recording is “OFF”.
49