Channel Vision DVR-8N - Manual (Page 56)

55
MENU SETUP
6.4.4 EVENT MESSAGE
At
Move the cursor to the EVENT MESSAGE using © , ª buttons.
the EVENT menu,
Select “ON” or “OFF” using the (-), (+) buttons or wheel scroll of mouse
ON: The warning messag
6.4.5 EVENT MESSAGE RESET
At the EVENT menu,
Move the cursor to the EVENT MESSAGE RESET using © , ª buttons.
he event message from 1SEC to 30SEC using the (-), (+) buttons or wheel
VENT BUZZER using © , ª buttons.
heel scroll of mouse to set the event buzzer.
SOR INPUT and the following 2 pages
screen appears.
Select the desired channel using the © , ª buttons.
ch is connected with DVR using the (-), (+) buttons or wheel scroll of
mouse.
menu, press the ESC button.
Set the time to reset t
scroll of mouse.
6.4.6 EVENT BUZZER
At the EVENT menu,
Move the cursor to the E
Select “ON’ or “OFF” using the (-), (+) buttons or w
6.4.7 SENSOR INPUT
At the EVENT menu,
Move the cursor to the SENSOR INPUT using the © , ª buttons.
Press the ENTER button when the cursor is on the SEN
Select the type of sensor whi
To exit this SENSOR INPUT
e will be displayed when the event occurs.
Select the right sensor type according to the type of installed sensor with the unit.
NORMAL OPEN : The sensor is open in normal times.
NORMAL CLOSE : The sensor is close in normal times.
NOT USED: No sensors are connected to the DVR unit