Menu setup, 2 rs 232 – Channel Vision DVR-8N User Manual
Page 69
-
MENU SETUP
6.6.2 RS 232
At the LINK menu,
Move the cursor to the RS-232 using the
© , ª buttons.
tton when the cursor is on the RS-232 and the following screen appears.
S-232 menu, press the ESC button.
At
Move the cursor to the RS-422/485 using the
© , ª buttons.
n when the cursor is on the RS-422/485 and the following screen appears.
e to
value.
ESC button.
Press the ENTER bu
Use the
© , ª buttons to choose the item and use the (-), (+) buttons or wheel scroll of mouse to
set the data value.
To exit this R
6.6.3 RS-422/485
the LINK menu,
Press the ENTER butto
Use the
© , ª buttons to choose the item and use the (-), (+) buttons or wheel scroll of mous
set the data
To exit this RS-422/485 menu, press the
NOTE
B
PA
mission error checking.
STOP BIT : Data transmission ending bit
AUD RATE : Data transmission speed per second.
DATA BIT : Data transmission bit.
RITY BIT : Data trans
# CAUTION:
Turn off the power not to damage this unit when you connect RS-232 connector.
68