Sound processor section, O on/flat button (on/flat), G) echo button (echo) – Panasonic SC-CH950 User Manual
Page 14: 3) key control button (key con), Voice mute button (voice mute), 0 sfp mode button (sfp), 0 eq mode button (eq), Test signal transmission button (test), D jog mode button (jog mode), 0 jog control (jog)
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Front Panel Controls and Functions
Sound processor section
Oeee «*1^
— 1 1 -
=s=r---------------iX
l]>' ...
• =1 1 =
•o,® are only for
model SH-CH950.
•(For model SH-CH750)
For Australia and New Zealand, @ Is KEY CON instead of
ECHO.
The functions indicated by the numbers with biack background (for
example O) can also be activated from the remote control.
(See pages 22-23.)
o
ON/FLAT button (ON/FLAT)
Press to switch the EQ (equalizer curve) or SFP (simulated
listening environment) or Dolby Pro-Logic mode (Only for
model SH-CH950) on or flat.
(g) Echo button (ECHO)
(For model SH-CH750, only for the area except for
Australia and New Zealand)
Press to adjust the reverberation sound when in performing
“Karaoke".
(
3
) Key control button (KEY CON)
(For model SH-CH750, only for Australia and New Zea
land)
Use to adjust key level when performing “Karaoke”.
® Voice mute button (VOICE MUTE)
Press to perform “KARAOKE” (microphone mixing with an
accompaniment). (See page 70.)
0
SFP mode button (SFP)
Press to select the desired simulated listening environment.
(See page 55.)
0
EQ mode button (EQ)
Press to select the desired equalizer mode. (See page 54.)
0
Dolby Pro-Logic button and indicator
(DOLBY PRO LOGIC)
(Only for model SH-CH950)
Press to select the desired Dolby Pro-Logic mode.
(See page 61.)
Test signal transmission button (TEST)
(Only for model SH-CH950)
Press to transmit the test signal to adjust the output level of the
speakers. (See page 62.)
(D
Jog mode button (JOG MODE)
Press this button to select the desired adjustment mode.
(See page 58.)
0
Jog control (JOG)
Turn to adjust the level of equalizer curve, simulated listening
environment, and specific frequency shift, and so on.
(See pages 56-58.)
0
Memory button (MEMO)
Press to store the desired equalizer curve or simulated listen
ing environment.
® User button (USER)
Press to select the desired “USER” number. (See page 59.)
@ Frequency band select button (BAND)
Press to select the desired equalizer frequency band.
(See page 58.)
@ Slope (Q) select button [SLOPE (Q)]
Press to select “narrow” or “wide” mode of the cunre slope.
(See page 58.)
@ Digital noise cleaner button and Indicator
(DNC)
Press to reduce the noise on a tape or FM broadcast.
(See page 60.)