Maintenance, Head care, Head demagnetization – Panasonic SC-CH950 User Manual

Page 77: Maintenance of external surfaces

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Maintenance

■ Head care

To assure good sound quality for recording and playback, be sure

to clean the heads after approximately every

10

hours of use.

1. Press the stop/cassette holder open button to open the cassette

holder.

2. Switch the power of this unit to standby mode.
3. Clean the heads, pinch roller and the capstan shaft of each deck

with a cotton swab (or with a soft, lint-free cloth) slightly mois­
tened with alcohol.
Do not use any solution other than alcohol for head cleaning.

■ Head demagnetization

•In order to maintain good sound quality during recording and

playback, it is recommended that the heads should be demagne­
tized if distortion or poor sound quality persist after cleaning the

heads.

• If the heads become magnetized, they could create noise in

recordings, loss of high-frequency response, or erasure of valu­
able recordings. Several types of head demagnetizers are avail­
able and may be purchased at local electronics supply stores.

Follow the instructions that are supplied with the device.

•Do not bring any type of metal objects or tools such as magnetic

screwdrivers in contact with the head assembly.

■ Maintenance of external surfaces
•To clean this unit, use a soft, dry cloth.

For very dirty surfaces, dip a soft cloth in a weak soap-and-water

solution and wring well. After cleaning, wipe with a soft, dry cloth.

•Never use alcohol, paint thinner, benzine, or a chemically treated

cloth to clean this unit.
Such chemicals may damage the system's finish.

77

Advertising
This manual is related to the following products: