To stop tape playback, To close the cassette holder, Press close – Panasonic SC-CH950 User Manual
Page 38: Full auto-stop, About the dolby noise reduction system, Listening to tapes
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
■ To stop tape playback
(Also available from the remote control)
Press the deck Istop/cassette holder open
button.
■/A
Listening to Tapes
(continued)
■ To close the cassette holder
(When you want to close the cassette holder without inserting the
cassette tape)
Press CLOSE.
Press
CLOSE
■ Full auto-stop
When the tape reaches the end, the tape transport will automati
cally stop.
■ About the Dolby Noise Reduction system
Using Dolby NR reduces tape hiss in the high-frequency range. It
boosts the level of the high-frequency during recording, and iowers
it by the same amount during playback, simultaneously reducing
high-frequency noise incurred during the recording process.
B type:
Noise is reduced to about ^/b. Use this type when playing a tape in
the Dolby NR mode.
Ctype:
Noise is reduced to about Vio. Use this type when recording and
piaying back a high quaiity, high dynamic range source such as a
CD or FM broadcast.
Dolby noise reduction and HX Pro headroom extension
manufactured under license from Dolby Laboratories Li
censing Corporation. HX Pro originated by Bang & Olufsen.
“DOLBY”, the double-D symbol OD and "HX PRO” are
trademarks of Dolby Laboratories Licensing Corporation.