Panasonic SC-CH950 - Manual (Page 67)

When the day setting automatically advances after mak­
ing the ON time setting;
This system retains the ON/OFF time settings until you make
a new setting. In case you make a new ON time setting which
is later than the previous OFF time setting, the system auto­
matically advances the day you set on the step 3. When you
reset the OFF time, the day setting will return to the original
setting.
4
Set the OFF time.
T SELECT i 0 Press one of SELECT to select "20".
SET
C
T SELECT i
I ~
I
Press SET.
) Press one of SELECT to select “00".
SET
@ Press SET.
5
Select the desired preset channel.
T SELECT 1 ® Press one of SELECT to select the de­
sired preset channel.
SET
(D Press SET.
Be sure to prepare for recording in the cassette deck before
proceeding to step 6 .
Press POWER STANDBY (!)/ON to switch the
power to standby mode.
Please confirm □ REC indicator appears on the display.
Notes:
•If the power is on, the timer will not function. The system must be
in the standby mode.
•While timer recording is taking place, the volume level will be
automatically muted.
•Once the record timer operation finishes, it clears the record timer
mode. (For exception, see below.)
•Only when you select the record timer mode that functions every­
day from Sunday to Saturday, the record timer mode will not be
cancelled until you exit the record timer. To prevent the accidental
erasure of recording, press Q REC to clear the record timer mode
after the timer recording has finished.
■ To confirm the record timer
Press El REC to show Q REC on the display.
QREC
While in the timer standby mode, press Q REC twice.
Each time you press, the display changes to show the ON time,
OFF time, the broadcast band you select, in 3 seconds step:
Note:
When the record timer is functioning, do not press Q REC to
confirm the timer setting.
It cancels the timer-off time setting.
■ To exit the record timer modes
Press □ REC to go off □ REC.
r ^BREC
The record timer will not function, but the record timer setting will
stay in the memory.
To reset the timer setting after above operation, first press Q REC
to display E REC, and then press POWER STANDBY CD/ON to
switch the power to standby mode.
■ To enjoy the desired source after the timer set­
ting is completed
1. Press POWER STANDBY (!) /ON to on.
2 . Select the desired source.
When listening to a cassette tape, use the deck 1.
After enjoying the source, press POWER STANDBY (!)/ON to
standby mode.
Even if you change the music source, the timer recording will start
with the preset source.
67