Setting the message alert, Setting the message alert -29 – Panasonic KX-F280C User Manual
Page 107
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Setting the Message Alert
When this feature is on, the unit will let you know with an alert if a caller’s message has been
recorded or not.
When a new message is recorded in the ANSIFAX mode, a slow beep will sound and the
indicator will blink. When you hear the beep sound, play back the message(s). The beep sound
will stop and the indicator will stop blinking.
To set the Message Alert:
1
2
Press the MENU button until the following is shown.
PROGRAM[1.DATE
2.TEL
3.SYSTEM 4.REPORT]
Press #, then press 22.
MESSAGE
ALERT
= OFF [TON 2.0FF]
Press
1
to activate this feature.
MESSAGE
ALERT
= 0N [TON 2.OFF]
Press the SET button to store your selection in
memory.
PROGRAM[TDATE
2.TEL
3.SYSTEM 4.REPORT]
Press the MENU button to end the operation.
The display shows the current time.