Helpful hints, Czd geh ed, Qedq – Panasonic KX-F280C User Manual
Page 42
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Selecting the number of rings to answer in the FAX mode
When in the FAX mode, the unit will automatically answer on the first ring when receiving a call.
If you wish to change the number of rings to answer a call, you can choose the number among
“1" (one ring) through “4" (four rings).
HELPFUL HINTS;
• If you wish to have the opportunity to pick up the handset before the call is answered by the unit,
set the number of rings to “3” or “4”.
• If you find there is difficulty in fax receiving from machines that have an automatic transmission
feature, set the number of rings to “1
To change the FAX RING COUNT, proceed as follows:
Press the
MENU
button until the following is shown.
3
4
CZD GEH ED
j
CHI
4
] [jKL
5
] I UWO 6 j
[ » n s 7 ] [
t u v
S ] 9 ]
QEDQ
PROGRAM[1.DATE
2.TEL
3.SYSTEM 4.REPORT]
Press #, then press 06.
FAX RING COUNT=1
[1-4]
Press the number of the selection you desire.
Setting selections are:
1: one ring
2: two rings
3: three rings
4: four rings
Press the
SET
button to store your selection in
memory.
PROGRAM[1.DATE
2.TEL
3.SYSTEM 4.REPORT]
Press the
MENU
button to end the operation.
The display shows the current time.
2-14