Type of tape which can be recorded correcriy, To record from the beginning of the tape q, Before recording (oeck 2 only – Panasonic SCAK50 User Manual
Page 19
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Before recording (Oeck 2 only}
Type of tape which can be recorded correcriy
The unit automatically identilies the type of tape.
NORMAL POSITION/TYPE 1
0
HIGH POSmON/TYPE II
0
METAL POSITION/TYPE IV
X
This system cannot make a recording or erasing correctly, if metal
position tapes are used.
To record from the beginning of the tape Q
* •
You cannot record on the leader part of the tape. Before recording,
wind the tape past the leader to a point where recording can start
immediately.
How volume, sound quality/field and Super
woofer affect recording
The tape you are recording is not affected whatever by changes in
volume, sound quality/field or super woofer.
• [n recording, sound quality/field are set automatically to "FLAT".
• You can change volume and super woofer effect for the plavback
sound.
To erase a recorded sound |3
Disconnect the microphones.
Press TAPE DECK 1/2.
Insert the recorded tape into deck 2.
>71 Press DOLBY NR so that the Dolby NR indicator
goes off.
Press REV MODE to select reverse mode.
Press • REC/STOP.
□
You cannot open the deck 1 while recording.
You cannot fast-forward or rewind one deck while recording with
the other.