If the surfaces are dirty, For a cleaner crisper sound – Panasonic SCAK50 User Manual
Page 37
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Problem
Probable cause(s)
Suggested remedy
Reference
page(s)
When there is a television set nearby
The picture on the TV
disappears or stripes appear
on the screen.
The location and orientation of the antenna
are incorrect.
If you are using an indwr antenna, change
to an outdoor anteruia.
It)
The wiring at the back of the system is
unsuitable
Separate the antenna wire of the TV set
from the system.
When listening to tapes
Sound is low, intermittent,
poor quaiity, noisy, scratchy,
or unsteady.
Heads are dirty.
Clean the heads.
69
Dolby-NR is wrongly set.
Match Dolby-NR ON/OFF according to
the type of recording you made.
32
The deck does not enter the
recording mode.
The erase-prevention tabs are remo\ ed
from the cassette.
Attach tape to cover the space left by
removal of the erase-prevention tabs.
66
While listening to compact discs
The display does not show
the correct indication. Disc
play does not start when
you press the play button.
The disc label is upside down.
Set the disc with the label facing upward.
20
The disc is dirty.
Wipe the disc with a soft cloth.
66
The disc is scratched.
Replace the disc with a new one.
The disc is badly warped.
The disc is a nonstandard one.
Replace the disc with a different one.
66
There is condensation inside the CD
changer.
Wait for 60 minutes before using the CD
player.
A certain music passage
can’t be played correctly.
The disc is dirty.
Wipe the disc with a soft doth.
66
While using the remote control
The system cannot be
operated with the remote
control.
The batteries are installed in the reverse
polarity.
Re-insert the batteries in the correct
polarity.
6
The batteries are run-down.
Replace the batteries with new batteries.
6
iHafnfen0ncé
If the surfaces are dirty
For
a
cleaner crisper sound
To clean this unit, wipe with a soft, dry cloth.
If the surfaces are extremely dirty, use a soft cloth dipped in a siwp-
and-water solution or a weak detergent solution.
•
• Never use alcohol, paint thiriner, benzine, or chemically treated
cloths to clean this unit,
• Before using chemically impregnated doth, read the instructions
that came with the cloth carefully.
We recommend that you periodically clean parts (the shaded portion
in the figure below) the tape contacts like the heads.
Do not use any solution other than alcohol for head cleaning.