Switch on the power, Cd press clockmmer to select clock – Panasonic SCAK50 User Manual
Page 8
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Demo function
The demo function changes the display to an air plane taking ott from
an airport.
Turning the demo function ON/OFF
Press POWER and hold down -DISPLAY/-DEMO.
Every time you hold down the button;
DEMO (ON) ^ > NO DEMO (OFF)
When the demo function is ON, the demo is played automaticalh' in
the following cases.
• When power is ON
If the input source is set to CD or tape, and the system is left on
standby for more than 2 minutes.
• When power is OFF
If the clock has not been set.
Setting the time
This is a 24-hour display cluck.
This example in the figure shows how to set the time for 16:25 (4:25
p.m.).
Switch on the power.
CD
Press CLOCKmMER to select CLOCK.
Every time you press the button;
B
c
]
CLOCKS OREC — ©PLAY
------- Previous display -•----------
(2) (within 5 seconds or so)
Press MEMORY/SET.
(D Press V or A to select the hour,
d) Press MEMORY/SET.
(3) Press V or A to select the minutes.
(4) Press MEMORY/SET to finish setting the time.
The display will return to whatever was displayed before
vou set the time.
To display the time when power is ON
Press CLOCK/TIMER to select "CLOCK".
The time will be displayed for about 5 seconds and then the display
will return to whate\'er was previously displayed.