Panasonic NV-F65EA - Manual (Page 11)

The built-in digital clock employs the 24-hgur system.
PRESET/FINE/
CLOCK NORMAL
□ □
tracking
PROG NEXT
•Connect the VTR to the mains outlet.
• Press the VTR On/Off Switch to turn the VTR On.
^ When connecting this VTR to the mains or after a long
power failure, the indications flash.
J:X u LLfYjjY^^
o Press the Clock Button to start the date and time
setting.
SA
@ Press the “+” or ” Button to set the year.
FR
: : i :
liiuK
Q Press the Next Button.
@ Press the “ + ” or Button to set the month.
FR
i :“E
t Y t
@ Press the Next Button.
Press the “-t-” or Button to set the date.
su
T Wi
© Press the Next Button.
0 Press the “-h’’or Button to set the hour.
su
D
^7^
0 Press the Next Button,
0 Press the or Button to set the minute.
0 Press the Clock Button when the present time be­
comes exactly 9:10'OO".
SU
At every push of the Next Button, the flashing indication
changes in the following order,
YEAR->MONTH^DATE-^HOUR-^MINUTE
• In case of a power failure, the timer back-up system
maintains the clock operation and timer content for
at least 60 minutes. However, depending on the
charging time and the memory content, the back-up
time may be considerably longer. However, it takes
more than 60 minutes for the back-up circuit to
become operational, after the VTR is connected to
the mains.
•The Timer Record Function should be set to “Off”,
otherwise the VTR cannot be operated normally. In
this case, the Timer Record Indicator “H” will flash
to warn you.
• During date setting, the corresponding day is si­
multaneously set.
•The clock/timer of the VTR is programmed with the
calendar up to the end of the year 2087.
The indications 88-99 are for the years 1988-1999.
The indications 00-87 are for the years 2000-2087.
( l ! )