Panasonic NV-F65EA - Manual (Page 19)

© ©
PLAV----------------B/FF
SOHT SHAflP
PICTURE
CM > »
PAUSE/STILL STOP REC •
QD a
1
_
1
Preparation
•Make sure that the Timer Record Function is set to “Off”.
•Insert a recorded video cassette. When a video cassette
is already inside the VTR, press the VTR On/Off Switch to
turn it on.
•Turn the TV set on and select the video piayback channel,
•Set the Noise Filter/Edit Selector to “Off”.
Press the Play Button (►).
----------PLAY-----------
c> L-*'*
•Control the picture as you like with the Picture Sharpness
Control (sharp or soft contours).
Press the Stop Button (■) to stop the playback.
When the VTR is in the playback mode, press the
Pause/Still Button (II) to view a still-picture. To continue
the normal playback, press this button again.
PAUSE/STllL
QD
When the Fast Forward ►►/Cue (3 Button is kept pressed
while the VTR is in the playback mode, the tape will be
played back at high speed in forward direction.
-----0/FF
1»
When the Rewind ◄◄/Review Button is kept pressed
while the VTR is in the playback mode, the tape will be
played back at high speed in reverse direction.
REW/Q-
<K1
***••!**•*•!
To make possible Cue or Review playback without having
to keep the respective button pressed, first press the
Memory/Repeat/Search Button (Remote Controller) so that
the Search Indicator “S” appears in the Multi-Function
Display, and then press the Fast Forward ►►/Cue Q
Button or the Rewind ◄◄/Review Q Button.
To switch the VTR back to normal playback, press the Play
Button (►).
•When Cue or Review playback continues for more than
10 minutes, the VTR will automatically switch back to the
normal playback mode.
( 19 )