Panasonic NV-F65EA - Manual (Page 27)

USING TJ№ VTR AS A HI-FI AUDIO RECORDER
Headphones
(Optional)
Preparation
•Connect the VTR to the hi-fi audio system.
(Exampie of a connection diagram is shown).
• Insert a video cassette with the erasure prevention tab
intact.
When a video cassette is already inside the VTR, press
the VTR On/Off Switch to turn it on.
•Switch on the hi-fi audio system and select an audio
source.
•For “Adjustment of the Audio Recording Level”, see
page 24.
•Set the Tape Speed Selector to “SP” or “LP”.
He^^hohés lueVerControi
When using headphones, the volume level can be adjusted
with the Headphones Level Control.
Hi-Fi Audio Recording
Note: Selection of an audio track is not necessary for
recording.
O Set the Input Signal Selector to “Line/Audio”.
Q To start the recording, press the Record Button (•).
@ To achieve smooth transitions between adjoining
recordings, see notes on page 40.
Hi-Fi Audio Playback
•Press (for playback of both mono and stereo recordings)
the “Audio Output Mode Selector Button” (Remote
Controller) repeatedly so that the “Left” and “Right” Audio
Playback mode Indicator light up.
•To start the playback, press the Play Button (►).
Z' ^ ^ N
• If the sound is impaired by high frequency distortion
when recording from an FM tuner, set the MPX
Filter switch to “On”. If there is no distortion when
recording from an FM tuner, and for all other
recordings, set this switch to “Off”.
FM Stereo Tuner
Record Player
r27;