Panasonic NV-F65EA - Manual (Page 29)

□
o
1 1
O 0
£3
'
o ^ O O D D O D D O H
J e
- + - +
i mm
O Select the programme position (channel) to be re­
corded.
@ Press the OTR Off “+” or Button to set the OTR
ending time to 11:00.
•The “OTR” indicator will be displayed.
•If a tape with broken out erasure prevention tab is
inserted, the VTR will sound a warning to let you
know that the recording cannot be made.
•The VTR will automatically switch off, when the OTR is
completed. To turn the VTR on again, press the VTR
On/Off Switch.
When the Check/Programme Button is pressed once, the
present time wili be displayed.
PROG
When the Clock/Counter Selector Button (Remote Con­
troller) is pressed during OTR recording, the display will
change over to the counter mode.
•When the tape reaches its end during an OTR the
VTR wiii turn itseif off.
• Make sure that the OTR Function (One-Touch
Timer Recording) does not overlap a programmed
timer recording. An OTR always takes precedence
over a timer recording.
•It is possible to change the OTR starting time or the
ending time before the recording starts.
• It is possible to perform any VTR operation (except
timer recording) until the recording starts.
• It is possible to change the OTR ending time even
during the recording.
•To interrupt an OTR, press the VTR On/Off Switch
to turn the VTR off.
( 29 )