Panasonic KX-F2710NZ User Manual
Page 11
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Installation and Preparation
Connections and dialing mode setting
D
Helpful hint for setting the dialing mode:
1. Ensure that the dialing mode selector is set to TONE.
2. Lift the handset or press the SP-PHONE button, then listen for the dial tone.
3. Dial a familiar number.
4. If the call is successful, the unit is connected to a tone exchange. Leave the selector set to TONE.
5. If the call is n^ successful, the unit is connected to a pulse exchange. Switch the selector to PULSE.
Notes:
• We recommend the use of an exclusive power outlet to avoid interference from other equipment.
• When you operate this product, the power outlet should be near the product and be easily accessible.
• The unit will not function during a power failure.
• When you connect another telephone on the same line and if the decadic (pulse) signalling option is used,
bell tinkle may occur during dialling. If this occurs, the matter should be discussed with the telephone
supplier and should NOT be referred to Telecom Faults Service.
• Not all standard telephones will respond to incoming ringing when connected to the same line.
11