Panasonic KX-F2710NZ - Manual (Page 30)

Basic Instructions
Setting the number of rings to answer in the ANS/FAX mode
This feature determines the number of rings after which the unit answers a call in the ANS/FAX mode.
The following choices are available:
2-9: The unit will answer after the ring count specified.
Toll saver; (see below)
Ringer off; The unit will answer without ringing.
Toll saver:
• When you call the unit from a remote location, the number of rings will tell you if there are any new
voice messages or not.
If the unit answers on the second ring, there is at least one newly recorded message.
If the unit answers on the fourth ring, there are no newly recorded messages.
Hang up immediately when you hear the third ring. The third ring indicates that there are no new
messages. This will save you the toll charge for the call.
Helpful hints:
• If you wish to have the opportunity to pick up the handset before the call is answered by the unit, increase
the number of rings.
• If you find there is difficulty in fax receiving from machines that have an automatic transmission feature,
decrease the number of rings.
To change the setting, proceed as follows;
o
MENU.
0
START/Isfr!
1.SYSTEM SET UP
Press #08,
ANS/FAX RING
Press START/SET.
RING=2 AV
RECALL
REDIAL/PAUSE
CZ)0
Press A or T to select
the desired number of
rings.
Press START/SET to
store the setting.
Press MENU to end the
program.
30