Setting the day/night mode – Panasonic KX-F2710NZ User Manual
Page 48
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advanced Instructions
Setting the day/night mode
You may wish to use the unit as a telephone and facsimile {TEL/FAX mode) during the business hours and
switch to the answering device {ANS/FAX mode) during off hours.
With this feature on, the unit will automatically switch the receiving mode at a preprogrammed time without
the operator’s assistance.
RECALL
C3B
REDIAL/PAUSE
=)0
Press MENU.
r
1.SYSTEM SET UP
Press #32.
DAY/NIGHT MODE
Press START/SET.
MODE=OFF
A T
Press A or T to select
"ON”.
MODE=ON
A T
—If this feature is not
required, select “OFF’
Press START/SET to
store the selection.
DAY =12:00AM
O
Q
ocScS
®<S)CI3
CDCD®
ocScS
(2)Ct)(S
CD CD®
Enter the time at which
the day mode {TEUFAX
mode) starts.
Example:
The TEUFAX mode
starts at 9:00AM,
Press 0900, then press
* to select AM.
DAY =09:00AM
Press START/SET.
NIGHT=12:00AM
Enter the time at which
the night mode
{ANS/FAX mode) starts.
Example:
The ANS/FAX mode
starts at 5:00PM.
Press 0500, then press #
to select PM.
NIGHT=05:00PM
Press START/SET to
store the setting.
Press MENU to end the
program.
Note:
df you select another receiving mode manually when this feature is on, the unit will keep the receiving
mode that you select until either day or night mode starts.
48