Panasonic KX-F2710NZ - Manual (Page 19)

Installation and Preparation
Storing Phone Numbers for Automatic Dialing
The unit's memoty allows you to use both one-touch dialing (up to 10 phone numbers) and speed dialing
(up to 22 phone numbers) for rapid access to your most frequently dialed numbers.
One-touch dialing; The unit is equipped with 5 direct call station keys, each of which is divided into an
upper station and a lower station.
Speed dialing; The unit is equipped with additional 22 dialing stations. These stations are assigned to
2-digit numbers (00-21).
storing phone numbers for one-touch dialing
Each station can store a phone number up to 30 digits in length and the associated station name up to
10 alpha-numeric characters.
or
Press MENU repeatedly
until the following is
displayed.
.STORE TEL NO.
For upper stations 1 to
5;
Press one of the direct
call station keys.
Example: Station 4
<S04>=
or
For lower stations 6 to
10
:
Press LOWER, then
press one of the direct
call station keys.
Example: Station 8
<LWR>
<S08>^
o
©
Od)Ci)
Sd)®
(S®©
®CT)C
b )
____ H_
START/{Sg]
O
QDCScS)
©cS)©
START/iSEfl
O
Enter a phone number
Press START/SET to
store the number.
NAME =
Enter the station name
by following the
instructions on page 15.
Press START/SET to
store the station name.
—To program other
stations, repeat from
step 2.
Press STOP to end the
program.
Notes:
• To enter a hyphen in a phone number, press the LOWER key. A hyphen is counted as 2 digits.
• If you make a mistake while programming, press the STOP button, then make the correction.
• To erase a programmed phone number in step 3, press the STOP button when the cursor is positioned on
the beginning of the number.
• Confirm that phone numbers and their station names have been correctly stored by printing the telephone
number list. See page 64.
19