Panasonic KX-F2710NZ - Manual (Page 42)

Advanced Instructions
Delayed Transmission
Using a built-in clock, this unit can send documents automatically at a specific time. This allows you to take
advantage of low-cost calling hours given by some telephone companies.
The delayed transmission can be reserved to take place up to 24 hours.
©
©
RECALL
REDIAUPAUSE
CDS
Insert the documents
FACE DOWN.
Press MENU
1. SYSTEM SET UP
Press #25.
DELAYED XMT
Press START/SET.
MODE=OFF A T j
Press A or T to select
■‘ON”.
MODE=ON A T
—If this feature is not
required, select “OFF”.
Press START/SET.
NO . =
QDCpCp
©CDcS
(T)CD(^
Enter the phone number
using one-touch dialing,
speed dialing or a full
number.
—You can use the
electronic telephone
directory (see
page 21).
Press START/SET to
store the number.
—When using speed
dialing, press
START/SET again.
TIME 3I2;00AM
Enter the transmission
start time.
Example: 11:00PM
Press 1100, then press #
to select PM.
—To select AM, press *.
Press START/SET to
store the setting.
Press MENU to end the
program.
—When the
programmed time has
come, the unit will
automatically start
transmission.
Notes:
• If there is no answer or the line is busy, the unit wilt automatically redial the number up to 2 times.
• You can receive, transmit and copy documents white the delayed transmission is set. To copy or transmit
documents, remove documents from the tray and replace them when you have finished.
• If the programmed start time has passed during a power failure, delayed transmission wilt be attempted
soon after the power is restored.
• When polling transmission feature (see page 41) is set to ON; this feature is not available.
42