Press h/clear, Press ^ or to select desired track, Press memory – Panasonic RX-ES50 User Manual
Page 10: Repeat steps 2 and 3, Press ►/! i, To clear program play
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Listening to CDs
Selecting and listening to your favorite tracks (Program play)
(Available only from the remote control)
Up to 36 tracks can be programmed.
■ 2
5
■/CLEAR
MEMORY
► /II
Press H/CLEAR.
Press RANDOM on the remote control if
IRANDOMl
indicator is on.
Press ^ or to select de
sired track.
Track number
. |_
Cd
3
S-Í
JU
Press MEMORY.
Play sequence
Cd 3
—o /
Programmed track
Repeat steps 2 and 3.
Cd
G íGSG
Total play time of
Programmed tracks
Press ►/! I.
The programmed tracks are played in the
programmed sequence, and play stops
automaticlly.
To clear program play:
Press ■/CLEAR in the stop mode.
“CLEAR" appears on the display and all the programmed contents
will be cleard.
When “—:—” appears:
This means that the total play time of the programmed tracks has
exceeded 120 minutes. Tracks can stiii be programmed and played.
When “FULL" appears:
This means that the total number of the programmed tracks has
exceeded 36. No more tracks can be programmed.
Memory retention of programmed tracks:
The programming of the tracks will be retained in the memory even if
play is stopped at any time or the unit is turned off.
“P” appears on the display indicating that programmed memory
remains.
C d " P I B S
5
The programmed memory will be cancelled in the following
cases;
•When A is pressed
•When you disconnect the power cord without installing the memory
back-up batteries
To check what has bean programmed:
While "P” is on the display, press or in the stop mode. Each
time these buttons are pressed, a track nufnber and its play se
quence can be checked.
10