Radio, Cd player, Tape recorder – Panasonic RX-ES50 User Manual

Page 31: General, Maintenance, Technical, Maintenance of external surfaces, Lens care, Tape head care

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Maintenance

Maintenance of external surfaces

To clean this unit, use a soft, dry cloth.

If the surfaces are extremely dirty, use a soft cloth dipped in a soap
and water solution or a weak detergent solution.

Wring the doth well before wiping the unit.
Wipe once again with a soft, dry cloth.

Never use alcohol, paint thinner, benzine, or chemically treated

cloths to clean this unit, Such chemicals may damage the finish of

your unit.

Lens care

Open the CO iid and clean the lens with a blower (not included).
If the lens is extremely dirty, clean it with a cotton swab.

Tape head care

To assure sound quality for recording and playback, be sure to clean
the tape heads after approximately every 10 hours of use.

1. Open the tape iid by pressing A.

2. Clean the portions which contact the tape (the shaded portions in

the figure) with a cotton swab.

Do not use any solution other than alcohol for head cleaning.

Technical

Radio

Frequency range

(For United Kingdom)

FM
LW
MW

(For Australia and New Zealand)

FM

AM

87.5- 108 MHz (50 kHz steps)

144-288 kHz (9 kHz steps)

522-1611 kHz (9 kHz steps)

87.5- 108 MHz (50 kHz steps)

531-1602 kHz (9 kHz steps)

CD player

Sampling frequency
Decoding
Beam source

No. of channels

Wow and flutter

D/A converter

Tape recorder

Track system
Monitor system

Recording system
Erasing system
Frequency range

Normal position
High position

General

Power requirement

AC

Battery

Memory back-up for.

44.1 kHz

16 bit linear

Semiconductor laser (wavelength; 780 nm)

2 channel, stereo

Less than possible measurement data

MASH (1 bit DAC)

4 track, 2 channel, stereo

Variable sound monitor

AC bias

AC erase

50-16000 Hz
50-17000 Hz

230-240 V. 50 Hz,

Power consumption: 36 W

12 V (Eight R20/LR20, UM-1 batteries)

Do not use rechargeable type batteries,

computer/clock

6 V (Four R6/LR6, UM-3 batteries)

Do not use rechargeable type batteries.

8cmx2

PHONES: 32Q

MIX MIC: 5 mV (200-6000)

499x162x262 mm

3.8 kg without batteries

Speakers

Jacks

Output
Input

Dimensions (WXHXD)
Weight

Note:
Specifications are subject to change without notice.

Weight and dimensions are approximate.

MASH is a trademark of NTT.

31

Advertising