Panasonic RX-ES50 - Manual (Page 22)

Using Flay Tuner
CLOCK/
TIMER
[ADJUST t
•PLAY
•REC
Timer
You can record a desired radio broadcast at a set time.
To release the timer function;
(only when the unit is on)
Press TIMER to turn “OFF" display on.
The timer will operate on the time you have set, if you press TIMER
again so that the ‘TIMER’’ indicator lights.
To check what has been programmed;
Press ADJUST when the unit is off and TIMER display on.
The display changes automatically as follows:
1. Programmed time
2. Programmed source
3. Programmed volume level
4. Original display
To enjoy play after programming:
(after step 7)
1. Start playing the desired sound source.
2. After play, turn the unit off before timer play starts.
Even if you change the volume level or sound source, whatever was
programmed is restored at the play time.
Using the timer at the same time every day:
First check that TIMER appears on the display and then turn the unit
off.
Lights.
Make sure that you have set the clock (see page 7).
Example: Setting the timer to record an FM program from 13:00
to 14:30:
BATT/(£OW| r )
o
Press POWER,
CLOCK/
TIMER
Press ADJUST so that the
timer time is displayed.
Clock------------- ►Timer time to start
T i
Original display-(-Timer time to finish
(The display changes each time the but­
ton is pressed.)
Ld / 5
•ON- OFP mm
'•'n-nrt n-nn
Lruu uuu
^3
To change the source and volume for the timer
function:
Press TIMER to turn off the TIMER” display, and then perform
stepsS to Son page21.
To Stop the timer in mid-operation:
Turn the unit off.
The timer will not operate if the unit is on.
3 ®
COmjNE/TIME
©Press ►»/-H or to
show the time to start re­
cording.
\ I / _
CLOCK/
TIMER
[ adjust
1300 - 0-00
©Press ADJUST.
(The “OFF” indication starts flashing.)
4 ®
CD/TUKE/TIME
©Press ►►]/+ or to
show the time to finish re­
cording.
----------_A-I
IH30'
CLOCK/
TIMER
© Press ADJUST.
If you fail to set time:
Make sure not to set the same time for
both starting and ending the timer.
22