Settmg the clock, Press power, Press adjust so that “clock” is displayed – Panasonic RX-ES50 User Manual
Page 7: Press ►►!/+ or k^/— to show desired time, Press adjust, Press display, Setting the clock
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Settmg the Clock
The clock has a 24-hour display.
3
2-4
1
Example; Setting the clock to 16:20;
T
batt
/C
power
)
CLOCK/
TIMER
fADJUST
CD/rUNEmUE
ъ
CLOCK/
TIMER
Press POWER.
(This turns the unit on.)
Press ADJUST so that
“CLOCK” is displayed.
Clock--------------- >Timer time to start
T
i
Original display «-Timer time to finish
(The display changes each time the but
ton is pressed.)
r I
nr и n-n n
L L. и L Г' u-u
и
Press ►►!/+ or K^/— to Show
desired time.
The time display can be changed in one
minute units by tapping the buttons, and
quickly by holding down the buttons.
s. \ i gfcpy u
CLDC^ЙБe(JÍ-
/1 \
While the time display is flashing,
Press ADJUST.
(The clock now starts operating, and the
display returns to its original status.)
(Available only from the remote control)
This operation comes In handy to check the present time during
play or the tape counter display during recording.
DISPLAY
О
DISPLAY
Press DISPLAY.
Play status (CD/Radio)-> Present time^Tape counter
t_____________________________________________ I
(The display changes each time the button is pressed.)
“------- ” appears on the tape counter display when a tape has not
been loaded.