CatEye EC-T220 - Manual (Page 33)

33
Finish your training.
• Press the STOP button when you want to finish. Your training will
be stopped, and cool-down will begin. The speed and incline will be
reduced to the minimums.
Reference: •Alarm (buzzer) function is not available for quick
start.
•If the STOP button is pressed by mistake, the program
can be restarted by pressing the START button. When
the program is restarted, both the incline and speed
will be the minimums. So the speed should be in-
creased to your desired level by pressing the SPEED +
button.
•To cool down, continue to exercise. The distance and time data on
the numerical display, and the calories consumed data on the LCD
display, will continue to be updated. The belt will automatically stop
after 5 minutes, and the screen will be changed to the scrolling
screen. The belt can be stopped immediately and screen changed to
the scrolling screen by pressing the STOP button at any time during
the 5-minute cool-down.
Caution: The screen cannot be changed from the scrolling
screen back to the cool-down screen or the exercise
screen.
•The records of speed and pulse rate on the LCD can be scrolled by
pressing the SPEED or INCLINE +/- buttons.
Finishing training
HR control H I L L
STOP EMERGENCY
STOP INCLINE
HR control H I L L
STOP EMERGENCY
STOP INCLINE
Ending program
2
3
End the program.
• Pressing the STOP button will return you to the initial screen.
• If you are completely finished with your exercise session, be sure to
turn off the power switch on the front part of the main body.