Ther, Useful, Functions – CatEye EC-T220 User Manual

Page 39

Advertising
background image

39

ON

1

2

3

4

DI

P

ON

1

2

3

4

DI

P

ON

1

2

3

4

DIP

ON

1

2

3

4

DIP

Checking the total distances

The total distances which can be used as a guide for when to
change the running belt can be checked.
• Press and hold the SPEED + button and the INCLINE + but-

ton together for 3 seconds to change to the total distance check
display. The distance display will show the total distance trav-
eled up until that time.
After checking the total distance, press the EMERGENCY
STOP button to return to the initial screen.

O

THER

USEFUL

FUNCTIONS

2

Dip switch 1

Switching between mph display and km/h display

• As mentioned on page 10 of the "Start Guide," the display can

be switched between mph and km/h by the dip switches inside
the control unit.

• When the no. 4 switch of dip switch 1 (SW1) is OFF, the display

units are mph. When the no. 4 switch is turned ON, the display
units are changed to km/h.

• Switches no. 1, no. 2, and no. 3 are not used.
• After changing the dip switch settings, turn the power off and

back on again for the change in settings to take effect.

Dip switch 1 (SW1)

No. 4: ON

km/h

No. 4: OFF

mph

Changing the language

• As mentioned on page 10 of the "Start Guide," the language

can be changed from English to French, Spanish, or Japanese
(or German) by the dip switches inside the control unit.

• For English specifications, the no. 1 and no. 2 switch of dip

switch 2 (SW2) is ON, and all the others are OFF.

• Switches no. 3 and no. 4 are not used.
• After changing the dip switch settings, turn the power off and

back on again for the change in settings to take effect.

Dip switch 2 (SW2)

No.1: ON

No. 2: ON ................ English

No.1: ON

No. 2: OFF .............. French

No.1: OFF

No. 2: ON ................ Japanese

[German: 220V]

No.1: OFF

No. 2: OFF .............. Spanish

Setting the Safety Key Function

• As mentioned on page 10 of the "Start Guide," open the con-

trol unit and change the settings.

• When the no. 1 switch of dip switch 1 (SW1) is ON, the safety

function is activated. When the no. 1 switch is turned OFF, the
function is canceled.

• Switches no. 2, no. 3, and no. 4 are not used.
• After changing the dip switch settings, turn the power off and

back on again for the change in settings to take effect.

Dip switch 1 (SW1)

No. 1: ON

Safety key function activated

No. 1: OFF

Safety key function canceled

ON

1

2

3

4

DIP

ON

1

2

3

4

DI

P

Dip switch 1

Dip switch 2

Advertising