Analogue Solutions Vostok Deluxe - Manual (Page 39)

Vostok Deluxe
Analogue Solutions | Circuits – Main PANEL 39
VU / SIGNAL METER
The signal meter is used for a general overview of a signal – either audio or control voltage. It is not calibrated to any particular range so do not
use it to measure signals!
RANGE control
This is an input level / attenuator control for the signal fed to the
Meter via the socket.
Start with the Range set to minimum. Slowly increase the Range
until you get full scale deflection. Try not to overdrive the meter
(do not have the metal hitting full scale/range too often)