Analogue Solutions Vostok Deluxe - Manual (Page 48)

Vostok Deluxe
48 Circuits – Main PANEL | Analogue Solutions
This is the sequencer’s clock input. Use 5V gate trigger pulses. You can often use LFO square waves too! Using a triangle wave can
sometimes create random patterns.
To sync the sequencer to MIDI we recommend using the Gate output of the MIDI to CV converter. Then create a ‘clock’ sequence using your
DAW or MIDI sequencer by programming a sequence of notes (16ths, for example).
THRU socket
This is a copy of what is fed into the CLOCK socket. Use to send the clock signal to another module.
CV socket
This is the CV output signal generated by the sequencer. Feed to VCO pitch or Filter cut-off, for example.
GATE socket
This is the gate output signal generated by the sequencer. Feed to EG trigger input, for example.
PROG push button
This button toggles on/off the selected step’s Gate. When off, no gate is output for that step, when on a gate will be output for that step (when
the sequencer is running). The LED will indicate whether the current step’s Gate is set to on or off.
It is best to stop the sequencer when setting the steps’ Gates on or off.
STEP push button