Talkswitch M600I - Manual (Page 20)

20 Getting to know your phone M600i
This is the Internet version of the user guide. © Print only for private use.
Silent mode
In standby view press and hold to switch
between normal and silent mode. You can also
select
More > Turn on silent or tap in the
status bar, select Volume and mark Silent
mode . To exit silent mode via the status bar,
tap and unmark Silent mode .
Selecting sounds
Select > Volume > Settings from the status
bar, or select Tools > Control panel > Device
> Sounds & alerts to access settings such as
ringtones, button clicks and equalizer, see
Sounds & alerts on page 75. You can also set
individual ring signals for your contacts, see
Managing contacts on page 32.
Transferring sound
During an ongoing call or audio playback you
can transfer the sound to a connected
accessory, for example, from the speaker to a
Bluetooth headset. Open the volume dialog by
selecting
> Volume and then select More >
Transfer sound . The transfer function is also
available from the menus within the relevant
applications. It may not be possible to transfer
sound during playback of copyright-protected
material.
Transferring data
between phones
If you are upgrading from an old smartphone,
you can transfer data, such as calendar entries
and tasks to your new smartphone.
To keep data when replacing an old
smartphone
1. Using the old Sony Ericsson PC Suite,
synchronize your old phone with the
relevant computer applications and copy
other required files to the computer.
2. Uninstall the old Sony Ericsson PC Suite
and restart your computer.
3. Install the new Sony Ericsson PC Suite.
For more information, see Installing PC
Suite on page 56.
4. Using the new Sony Ericsson PC Suite,
synchronize your new phone with the
relevant computer applications and copy
other required files to the phone. For more
information, see Synchronization and
backup on page 59.
All data from the old phone has now been
transferred to the new one.