Talkswitch M600I - Manual (Page 68)

68 Control panel M600i
This is the Internet version of the user guide. © Print only for private use.
After 5 seconds – the phone answers
automatically after five seconds.
Always route answered calls to
Bluetooth
– mark the check box to route
answered calls to a Bluetooth headset.
Reject with SMS
If for some reason you want to reject a call, for
example during a meeting, you can set up the
phone to send an SMS with a predefined
message to the calling party.
Select Tools > Control panel > Call settings >
Reject with SMS to make the settings. When
the feature is enabled and you reject a call, you
will be asked whether you want to send an
SMS text message.
Restrict calls
This feature allows you to enable or disable
certain types of calls, for example
international calls. You need a special PIN
code from your operator to make the settings
in
Tools > Control panel > Call settings >
Restrict calls .
Show or hide number
You can choose whether you want the called
party to see your phone number. Select
Tools
> Control panel > Call settings > Show or
hide number to make the settings. Marked
Network default leaves the decision to the
network.
TTY Settings
You can enable the use of a teletype writer; an
aid for deaf and speech-impaired people.
Connect the TTY device to the accessories
connector at the base of the phone.
Voice control
You can dial and receive calls by using voice
commands. Select
Tools > Control panel >
Call settings > Voice control to make the
settings.
Recording voice commands
Before you can make any settings in this
dialog, you must previously have recorded the
voice command words for answer, busy, and
the magic word.
The magic word is a word you must say before
the command words, so that the phone “starts
listening” for the command. Choose a long
unusual word, which can easily be
distinguished from ordinary background
speech.
Select More > Edit > Record to record a
highlighted voice command. Select More >
Edit > Play to listen to a highlighted command.