Talkswitch M600I - Manual (Page 70)

70 Control panel M600i
This is the Internet version of the user guide. © Print only for private use.
• Currency – select the currency type (three
letter code).
To be saved, the settings must be followed by
the entry of a valid PIN 2 code, provided by
your network operator.
Note: The Call meter service does not work if
you have roamed to a network that does not
provide charging information.
Connections
The connection settings control how your
phone communicates with other devices.
Bluetooth wireless
technology
Select Tools > Control panel > Connections >
Bluetooth to make the Bluetooth settings and
connect to other Bluetooth devices.
Note: Only connect to trusted devices.
For all tasks, except for a single file transfer, it
is necessary to set up a permanent and trusted
relationship between your phone and the other
device. This is called pairing (or bonding).
Paired devices are remembered by your phone
so you do not need to pair with these again.
This simplifies future connections and makes
them secure, as paired devices have already
authenticated each other.
Settings tab
This is where you make all the Bluetooth
settings of your phone.
My phone name – enter the name you
want to be displayed when your phone is
presented to other Bluetooth devices.
Bluetooth on – activates Bluetooth.
Visible to other devices – makes it
possible for other Bluetooth devices to
find your phone.
Enable power saving – saves power by
limiting the activity of your phone. Your
phone will no longer accept requests for
additional connections from other
Bluetooth devices after a Bluetooth
connection has been established, but it
will still be able to discover other
Bluetooth devices and request connections
to them.
Devices tab
This is where all devices that your phone has
already paired with are listed, even if they are
not within reach and Bluetooth-activated for
the moment.
Pairing with a device
Select New device to pair with a new device.
The phone will then search for visible
Bluetooth devices within range. To pair with
one of the devices, select it in the list and enter
the passcode (also called passkey) if you are
asked to.