Cisco 3825 - Manual (Page 169)

A-37
Cisco 3825 Mobile Wireless Edge Router Software Configuration Guide
OL-15667-03
Appendix A Cisco 3825 Mobile Wireless Edge Router RAN-O Command Reference
interface atm ima
interface atm ima
To configure an ATM IMA group and enter interface configurations mode, use the interface atm ima
global configuration command. If the group does not exist when the command is issued, the command
automatically creates the group.
interface atm slot/ima<group-number>
Syntax Description
Defaults By default there are no IMA groups, only individual ATM links.
Command Modes Global configuration
Command History
Usage Guidelines When a port is configured for IMA functionality, it no longer operates as an individual ATM link.
Specifying ATM links as members of a group using the ima-group interface command does not enable
the group. You must use the interface atm slot/ima<group-number> command to create the group.
Examples The following example shows the how to create the IMA group:
Router(config)# interface ATM0/IMA0
Router(config-if)# no ip address
Related Commands
slot Specifies the slot location of the ATM IMA port adapter.
group-number Specifies an IMA group number from 0 to 3. You can create up to four
groups.
Release Modification
12.0(5)XE This command was introduced.
12.4(4)MR This command was incorporated.
Command Description
ima-group Configures the physical links as IMA group members; execute this
interface configuration command for each physical link that you
include in an IMA group.
ima group-id Enables the user to configure the IMA Group ID for the IMA
interface.
interface atm Configures physical links for ATM.
show ima interface atm Displays general and detailed information about IMA groups and the
links they include.