New features in cisco ios release 12.4(16)mr2, Keyword ignore-vpi-vci added to xconnect command, New features in cisco ios release 12.4(16)mr1 – Cisco 3825 User Manual

Page 23

Advertising
background image

1-13

Cisco 3825 Mobile Wireless Edge Router Software Configuration Guide

OL-15667-03

Chapter 1 Overview of the Cisco 3825 Mobile Wireless Edge Router

New Features in Cisco IOS Release 12.4(16)MR2

Figure 1-5

Example of Cisco 3825 Router VWIC and NM-2W Configuration Options Block Diagram

New Features in Cisco IOS Release 12.4(16)MR2

With Cisco IOS Release 12.4(16)MR2, the Cisco MWR 1941-DC-A router supports the following
feature:

Keyword ignore-vpi-vci Added to xconnect Command, page 1-13

Keyword ignore-vpi-vci Added to xconnect Command

With the ignore-vpi-vci keyword configured, the MWR ignores the VPI/VCI value in the PW packet and
does a blind rewrite with the local configured AC-side PVC's VPI/VCI value. This applies only when
the xconnect command is configured under the PVC, which is the N:1 with N=1 special case. It does not
apply when the xconnect command is configured under the subinterface, which supports N>1.

The xconnect command with keyword ignore-vpi-vci results in the PVC mapping being done in a
cooperative way if the MWR works the same way as the receiving router. Without this command, the
MWR checks the VPI/VCI value inside PW packet for matches against the local configured PVC or
PVC-mapping. With the ignore-vpi-vci keyword configured, the MWR ignores the VPI/VCI header
inside the received PW packet and does a blind rewrite with the local configured AC-side PVC's
VPI/VCI value.

New Features in Cisco IOS Release 12.4(16)MR1

With Cisco IOS Release 12.4(16)MR1, the Cisco 3825 router supports the following:

GSM

• VWIC-2T1/E1-RAN
used for T1/E1
• *MUST* reside in one
of four WIC slots to
traverse HDLC Ctrl
(8 GSM E1 max)

AIM-ATM-8

Module on

Motherboard

NM - 2W

UMTS

lub

IP

UMTS

• VWIC-2T1/E1-RAN
used for T1/E1
• VWIC FPGA unused
for

UMTS

• Direct routing to
AIM-ATM

IP

• VWIC-2T1/E1-RAN
used for T1/E1
• VWIC FPGA unused
for

IP

• Direct routing to
IOS

CPU

IOS CPU

RAN WIC RAN WIC

NM - 2W

UMTS

lub

IP

RAN WIC RAN WIC

RAN WIC

RAN WIC

RAN WIC

RAN WIC

UMTS

lub

GSM
Abis

IP

UMTS

lub

HDLC Ctrl

280206

Advertising