Cisco 3825 User Manual
Page 211
A-79
Cisco 3825 Mobile Wireless Edge Router Software Configuration Guide
OL-15667-03
Appendix A Cisco 3825 Mobile Wireless Edge Router RAN-O Command Reference
show connection
describes the significant fields shown in the display.
Related Commands
Table 1
show connection Field Descriptions
Field
Description
ID
Arbitrary connection identifier assigned by the operating system.
Name
Name of the connection.
Segment 1
Segment 2
Information about the interworking segments, including:
•
Interface name and number.
•
Segment state, interface name and number, and channel ID.
Segment state will displays nothing if the segment state is UP,
“-” if the segment state is DOWN, and “***Card Removed***”
if the segment state is DETACHED.
•
Type of encapsulation (if any) assigned to the interface.
•
Permanent virtual circuit (PVC) assigned to the ATM interface,
data-link connection identifier (DLCI) assigned to the serial
interface, or VLAN ID assigned to the Ethernet interface.
State or Status
Status of the connection, which is one of the following: INVALID,
UP, ADMIN UP, ADMIN DOWN, OPER DOWN, COMING UP,
NOT VERIFIED, ERR.
Command
Description
connect (L2VPN local
switching)
Connects two different or like interfaces on a router.
show atm pvc
Displays the status of ATM PVCs and SVCs.
show frame-relay pvc
Displays the status of Frame Relay interfaces.