Cisco 3825 - Manual (Page 36)

1-26
Cisco 3825 Mobile Wireless Edge Router Software Configuration Guide
OL-15667-03
Chapter 1 Overview of the Cisco 3825 Mobile Wireless Edge Router
New Features in Cisco IOS Release 12.4(16)MR1
PW Redundancy With PW Class
pseudowire-class pw_redundancy
encapsulation mpls
interface GigabitEthernet 0/0
xconnect 2.2.2.2 500 encapsulation mpls
backup peer 2.2.2.2 600 pw-class pw_redundancy
backup delay 20 20
Maximum Number of Supported ATM Ports
This enhancement increases the maximum number of supported ATM ports on the Cisco 3825 router.
The maximum number of ATM ports supported on the AIM-ATM-8 depends on the slot in which the
AIM-ATM-8 is installed:
• AIM-ATM-8 installed in slot 0—maximum of 12 ATM ports supported
• AIM-ATM-8 installed in slot 1—maximum of 8 ATM ports supported
The ATM-AIM module still supports a maximum of 4 ATM ports.
ATM Cell Switching
This feature provides PVC-to-PVC cell switching on the Cisco 3825 router.
The feature includes PVC remapping within either an AIM-ATM module or AIM-ATM-8 module. Also,
the feature is available for PVC-to-PVC switching between ATM interfaces and/or ATM IMA groups.
Note that PVC values must be above the well-known virtual path identifier/virtual channel identifier
(VPI/VCI) range (0/32).
The following configuration snippet shows a connection from ATM0/0/0 to ATM0/0/1. The PVC is
mapped from 0/32 to 0/33 and vice versa.
controller E1 0/0/0
mode atm aim 1
!
controller E1 0/0/1
mode atm aim 1
!
interface ATM0/0/0
pvc 0/32 12transport
!
interface ATM0/0/1
pvc 0/33 12transport
!
connection NAME a0/0 0/32 a0/1 0/33