BUCHI Melting Point M-560 - Manual (Page 13)

3 Technical data
13 Melting Point M-560 Operation Manual, Version D
Table 3-4: Technical data of the Melting Point M-560
Melting Point M-560
250 °C to 400 °C ±0.3 °C to ±0.5 °C
Repeatability of melting point at 0.5 °C/min ±0.1 °C
Accuracy of boiling point at 1.0 °C/min up to 400 °C ±0.5 °C
Repeatability of boiling point at 1.0 °C/min ±0.3 °C
Temperature gradients, °C/min 0.1, 0.2, 0.5, 1, 2, 3, 5, 10, 20
Heat-up time (50 °C–350 °C) at 25 °C ~4 min
Cool-down time (350 °C–50 °C) at 25 °C ~13 min
Electrical supply 100–240 V (±10 %), 50–60 Hz
Power consumption 150 W
Contact termination L, N, PE
Approval CE, CSA, UL
Dimensions (W×H×D), mm 190Ч200Ч370
Weight, kg 4.5
Environmental conditions For indoor use only
Temperature 5–40 °C
Altitude up to 2000 m a.s.l.
Humidity Maximum relative humidity 80 % for temperatures up to
31 °C, decreasing linearly to 50 % relative humidity at 40 °C
Overvoltage category II
Degree of protection IP20
Pollution degree 2
Storable methods for melting point 50
Storable methods for boiling point 50
Compliant with Pharmacopeia methods PH. EUR. 6.1.2.2.60, USP XXI 741 and JP
NOTE
Temperature measuring accuracy refers to pharmacopoeia melting point.
3.3 Materials used
Table 3-5: Materials used
Component Material designation
Print holder PA
Heating block Aluminium
Lenses Glass
Axial fan Aluminium
Housing PU, Stainless Steel, Glass
Cover POM, Ceramic, Aluminium, Stainless Steel